Follow mode with a MIDI keyboard

In Follow mode the accompaniment is not a backing track. It compares every note you play with your part in the score, works out where you are and how fast you are going, and moves the orchestra with you.

What you need

Follow mode listens to MIDI only. It cannot hear an acoustic instrument through a microphone yet; with an acoustic instrument, use Fixed mode and set the tempo you want.

Connect your instrument

  1. Plug the instrument in before opening the practice room, or reload the page after plugging it in.
  2. Click the MIDI indicator at the top right. The browser asks whether the site may use MIDI devices; allow it.
  3. In the Follow tab, choose your instrument if more than one device is listed. Play a few notes: the indicator lights up for each one.

Calibrate the latency

Every setup has a delay between pressing a key and hearing the orchestra, made up of the MIDI connection, the browser and your audio device. The app compensates for it by moving the orchestra slightly earlier. Open the Follow tab and start the calibration: tap along with the clicks on your MIDI keyboard. Tapping on the keyboard measures the same path your playing takes, which is why it is chosen automatically when a keyboard is connected. Calibrate again when you change headphones, speakers or the audio device.

How the orchestra follows

Responsiveness

The Responsiveness slider in the Follow tab sets how quickly the orchestra corrects itself when you and it drift apart. Higher values follow every nuance but can feel nervous in fast passages; lower values feel steadier, like an orchestra with a strong sense of its own pulse. Start in the middle and adjust to the piece.

Practise without a keyboard

To see Follow mode at work without an instrument, open the Debug tab and switch on the virtual soloist. It plays your part with its own rubato while the follower tracks it, and the chart shows the position, tempo and confidence as they change.